Ripper Attachments
The ripper body is made entirely from Hardox material; For site conditions, it is reinforced with nose part, nail and adapter and it is possible to change in case of wear.Ripper Attachment makes digging in hard soils easier and more efficient. Ripper is the perfect attachment to cut any hard terrain encountered in your working environment.
efore working with the bucket, all hard ground was scanned with ripper; it was made ready to load easily, without need for blasting. Especially in 30-60 tons class machines, it works very efficiently.When soil conditions are less than desired, a Galen Ripper Attachment will provide an extra mechanical advantage to shatter from the upper crust.Pass the hard, hard and frozen material with the strong force of the Galen ripper attachment.
It was designed to remove rock / marble masses particularly in quarries and areas where blasting is not possible and it is difficult to work with a bucket; The ripper body is manufactured entirely from Hardox material; one piece production is preferred without using nail.Designed for maximum penetration, the ripper attachment tears with firm force from hard soil and frozen ground. It provides breaking power and a heavy-duty shaft strengthens the coupling structure for maximum uptime protection.
Galen ripper attachments feature:
- The easy-to-replace corner wear head provides additional protection in high wear areas.
- Flat bottom design with higher paddle angle leaves a clean floor and reduces tire wear and damage.
- The core angle increases penetration and cycle time for increased production.
- Our high performance Galen Ripper Attachment is built for precision and power.
Ripper Attachments are often used to remove hard ground, rocks, shale, hard clay and any ground condition where permafrost and normal bucket penetration are difficult.
The single-point tooth design provides optimum penetration by easily detaching from frozen ground and root systems. And after loosening the floor, replace the ripper insert with a bucket to complete the hole cleaning. Penetrate and remove with the ripper’s strong tear force.
The ripper shape is an important part of the ripper design, it should have a gradual curve so that the material can slide out of the tooth onto the shaft where maximum force can be applied, but most manufacturers and operators cannot understand the geometry behind, efficiently removing the ground.
The world consists of millions of layers and millions of changing ground and weather conditions over millions of years.Excavator ripper attachments are designed to work only parallel to the bottom of the ground surface to remove rocks and remove the ground surface from the layer so that it peels like the skin of an orange.
The best way to penetrate and remove this material is to separate the material from «grains» or layers, such as lumber grains. More importantly, this is a larger, meaning time and money that slows the progress of the excavator, and the probability of breaking the ripper tooth or even the tooth’s nose. creates resistance.
Rupture of ripper teeth occurs only with improper use. The tooth is the device that allows the ripper shaft to enter the material being removed or push it through or behind rocks or ice, and then slide the body upward, where intense force can be applied. Ripper teeth should not be used to pry rocks or ice.
Therefore, the ideal breakout will require the rippers to be placed at an angle fully accessible by the excavator, then pulled as close as possible from the earth to the excavator, but to operate parallel to the surface, this guarantees efficiency and reduces wear.
As standard — Ripper cheeks come reinforced with boots, nose and bucket pins provided as standard additions with each Galen Ripper Attachment.
Armored Guards — Ripper blade stub guards are available to arm the Ripper against the toughest terrain and are requested during abrasive and rock applications.
The single-point tooth design provides optimum penetration by easily detaching from frozen ground and root systems. And after loosening the floor, replace the ripper insert with a bucket to complete the hole cleaning. Penetrate and remove with the ripper’s strong tear force.